Skip to main content

BTF-LIGHTING SP805E WLED Controllers 2.4GHz RF RW4 Remote Kit,DC5V/12V/24V

BTF-LIGHTING

USD $57.58
(No reviews yet) Write a Review
SKU:
B0H1QMQNWN
spreadr-amazon-region:
com
spreadr-amazon-asin:
B0H1QMQNWN
spreadr-amazon-producttype:
dropshipping
spreadr-amazon-title:
BTF-LIGHTING SP805E WLED Controllers 2.4GHz RF RW4 Remote Kit,DC5V/12V/24V B0H1QMQNWN
spreadr-amazon-url:
http://www.amazon.com/dp/B0H1QMQNWN
Adding to cart… The item has been added

Brand: BTF-LIGHTING

Color: White

Features:

  • 【High-Performance ESP32 Controller】Powered by an ESP32 chip for stable processing and 2.4GHz Wi-Fi. Connects directly with WLED Native or WLED+ App - no gateway required. Supports SPI addressable LED strips LED matrix (WS2811,WS2812,WS2814,WS2815, SK6812, WS2805,WS2811 dual IC etc.) and PWM strips, covering single-color, CCT, RGB, RGBW, RGBCCT. For SPI strips, each supports up to 2048 pixels per channel.
  • 【2.4G Wireless RF Remote】The controller features a built-in RF-to-IR module, One remote supports multiple controllers, You can mark your favorite lighting effects, and then use the DIY buttons on the RF remote to activate the three marked effects. Built-in microphone with external sound sensing capability. The light strip automatically adjusts its lighting effects based on sound rhythm and volume changes.
  • 【100+ Dynamic Modes & DIY Effect Save】 Over 100 pre-programmed modes plus full DIY customization. Mark up to 3 favorite effects and recall them via DIY buttons on the RF remote.
  • 【Wide Voltage & Easy Firmware Update】 Input voltage DC5V/12V/24V, 6A per channel (12A total).UART port supports firmware download and upgrades, and software can be downloaded directly to the ESP32 module via the Type-C port.
  • 【Flexible Expansion】Connect external devices (such as buttons or sensors) using the programmable IO33 pin and GND terminal to change lighting modes or activate special functions. The reliable signal loop also supports creative setups like lights that react to sound or motion, giving you more freedom for DIY projects.
  • 【Important Note】Before operating with the remote controller, please calibrate the LED strip type and set the strip length in the WLED APP first. Refer to the product page video or the included user manual. Proper configuration ensures stable performance of your LED lights.